PEEK-5600GF30
Thermoplastic high performance polymer (PEEK) for injection molding
Maikesi's polyetheretherketone polymers include a variety of versions: unreinforced, glass fiber reinforced, carbon fiber reinforced, and different formulas can be adjusted to improve mechanical strength and wear resistance。
If you have a need, Maikesi can purchase PEEK rods and plates in China for machining into different parts.
Product name: PEEK-5600GF30
PEEK GF30 Material characteristics:
High temperature resistance; Corrosion resistance; Hydrolysis resistance; Wear resistance; High strength; Low friction coefficient.
Applications of PEEK GF30: Aerospace, Petrochemical, Medical, Food processing, Automotive.
Typical Data Sheet：
|
ITEM |
METHOD |
UNIT |
TEST DATA |
|
Mechanical properties |
|||
|
Tensile Strength(23℃) |
ISO 527-2/1B/50 |
MPa |
175 |
|
Tensile modulus(23℃) |
ISO 527-2/1B/51 |
GPa |
12.5 |
|
Elongation at break(23℃) |
ISO 527-2/1B/50 |
% |
2.8 |
|
Flexural strength(23℃) |
ISO 178 |
MPa |
268 |
|
Flexural modulus(23℃) |
ISO 178 |
GPa |
11.5 |
|
Compression strength(23℃) |
ISO 604 |
MPa |
247 |
|
Charpy Impact Strength |
ISO 179/U |
KJ/m2 |
55(No break) |
|
Izod impact strength(Notched) |
ISO 180/A |
KJ/m2 |
10 |
|
Thermal properties |
|||
|
Melting point |
DSC |
℃ |
343 |
|
HDT |
ISO 75-1/-2 |
℃ |
330 |
|
RTI |
UL 74685 |
℃ |
260 |
|
Thermal expansion coefficient |
ASTM D696 |
ppm K-1 |
18 |
|
Flammability |
UL 94 |
/ |
V-0 |
|
Thermal Conductivity |
ISO 22007 |
W/（m·K） |
0.3 |
|
Electrical properties |
|||
|
Dielectric strength |
IEC 60243-1 |
KV/mm |
17 |
|
Dielectric constant |
IEC 60250 |
- |
3.3 |
|
Surface resistance |
IEC 61340 |
Ω |
1013 |
|
Lossy medium |
IEC 60251 |
- |
0.005 |
|
Other properties |
|||
|
color |
- |
|
Nature |
|
Density |
ISO 1183 |
g/cm3 |
1.5 |
|
Water absorption (25℃.24Hrs) |
ISO 62 |
% |
0.05 |
|
Molding shrinkage（25-24℃） |
3mm，170℃level |
% |
0.3 |
|
vertical |
% |
0.8 |
|
|
Poisson's ratio |
ISO 527-2 |
|
0.35 |
|
Rockwell hardness |
GB/T 3398.2 |
HRR |
120 |
|
Friction coefficient |
ASTM D3702 |
μ |
0.30-0.4 |
|
Melt flow rate |
ISO 1133 |
g/10min |
3 |
PEEK（Polyetheretherketone） is a special plastic with the characteristics of high temperature resistance, corrosion resistance, wear resistance, high strength and low friction coefficient.
Our factory can add glass fiber into the material through blending and compounding to improve its heat resistance and mechanical properties.
If you would like to know the price of peek, you can send a quote request by email
