PPO-PO150G25
Engineering Plastics Thermoplastic High Performance Polymers (PPO) for Injection Molding
Product name: PPO GF25
PPO Material features:
1.25% glass fiber reinforced, high rigidity, excellent mechanical properties.
2. Good chemical resistance, hydrolysis resistance, acid and alkali resistance and detergent corrosion resistance.
3. It has excellent dielectric properties and is suitable for electrical applications.
4. Good dimensional stability and good processing performance.
5. Excellent wear resistance, good fatigue resistance, and excellent long-term performance.
Applications of polyphenylene oxide: water pump impeller and high-strength structural parts application
Typical Data Sheet：
|
Physical Properties |
Condition |
Standard |
Unit |
Value |
|
Density |
23℃, 50%RH |
GB/T1033 |
g/cm 3 |
1.25 |
|
Forming Shrinkage |
23℃, 50%RH |
GB/T 15585 |
% |
0.3~0.5 |
|
Rheological Properties |
Condition |
Standard |
Unit |
Value |
|
Melt index |
280℃/5Kg |
GB/T3682 |
g/10min |
10 |
|
Thermal Properties |
Condition |
Standard |
Unit |
Value |
|
H.D.T |
1.82MPA |
GB/T1634 |
℃ |
137 |
|
Mechanical Properties |
Condition |
Standard |
Unit |
Value |
|
Tensile Strength |
50mm/min |
GB/T1040 |
Mpa |
105 |
|
Strain at Break |
50mm/min |
GB/T1040 |
% |
3 |
|
Flexural Strength |
-2mm/min |
GB/T9341 |
Mpa |
140 |
|
Flexural Modulus |
-2mm/min |
GB/T9341 |
Mpa |
5500 |
|
Impact Strength |
4mm,5.5 J |
GB/T1843 |
KJ/M2 |
9 |
|
Flame Retardant Properties/ |
Condition |
Standard |
Unit |
Value |
|
Flammability |
23℃, 50%RH |
UL 94 |
0.9MM |
HB |
|
Flammability |
23℃, 50%RH |
UL 94 |
3.2MM |
HB |
Injection molding process:
Polyphenylene oxide is an engineering plastic with excellent hydrolysis resistance,PPO or PPE for short.
Our factory can process into MPPO pellets through compounding.Increasing the flexural modulus by adding glass fibers to the material.
If you want to know the price of polyphenylene oxide, you can send a quotation request by email.
