PPO-PO350F
Engineering Plastics Thermoplastic High Performance Polymers (PPO) for Injection Molding
Product name: Polyphenylene oxide-PO350F
PPO material characteristics:
1. Good mechanical strength, high temperature resistance and low temperature resistance.
2. High flow and excellent surface gloss.
3.UL94 halogen-free flame retardant, bromine-free and antimony-free, in line with EU ROHS environmental protection requirements.
4. It has good anti-dielectric properties and is suitable for applications in electrical places.
5. Good light shielding performance.
Application of polyphenylene oxide: Electrical junction box application
Typical Data Sheet：
|
Physical Properties |
Condition |
Standard |
Unit |
Value |
|
Density |
23℃ , 50%RH |
ASTM D792 |
g/cm³ |
1.21 |
|
Forming Shrinkage |
23℃ , 50%RH |
ASTM D955 |
% |
0.5~0.7 |
|
Water Absorption |
24,hours |
ASTM D 570 |
% |
0.06 |
|
Rheological Properties |
Condition |
Standard |
Unit |
Value |
|
Melt index |
280℃/5Kg |
ASTM D1238 |
g/ 10min |
12 |
|
Thermal Properties |
Condition |
Standard |
Unit |
Value |
|
H.D.T |
1.82MPA |
ASTM D648 |
℃ |
122 |
|
Ball Pressure Test |
125℃ |
IEC 60695- 10-2 |
-- |
Pass |
|
Mechanical Properties |
Condition |
Standard |
Unit |
Value |
|
Tensile Strength |
50mm/min |
ASTM D638 |
Mpa |
60 |
|
Strain at Break |
50mm/min |
ASTM D638 |
% |
15 |
|
Flexural Strength |
- 1.3mm/min |
ASTM D790 |
Mpa |
98 |
|
Flexural Modulus |
- 1.3mm/min |
ASTM D790 |
Mpa |
2500 |
|
Impact Strength |
3.2mm,5.5 J |
ASTM D256 |
KJ/M2 |
16 |
|
Flame Retardant Properties |
Condition |
Standard |
Unit |
Value |
|
Flammability |
23℃ , 50% |
Injection molding process:
Polyphenylene oxide is an engineering plastic with excellent hydrolysis resistance,PPO or PPE for short.
Our factory can process into MPPO pellets through compounding.For injection molding.
If you want to know the price of polyphenylene oxide, you can send a quotation request by email.
